Sakhi Management ConsultingDiscuss your project
MenuClose
Supplier audits, IATF 16949 and production approval

Automotive & Supplier Quality

Prepare for a Maruti VSA or other customer supplier assessment by tracing one live part from the customer requirement to the production control and shipment record. Use the buyer’s current assessment criteria to set the scope and use IATF 16949 tools to test whether that control works in production.

Automotive industry illustration

Implementation guidance

  1. Customer requirementDrawing revision, critical characteristic, approval or change notice
  2. Production controlProcess flow, PFMEA, control plan, measurement and reaction plan
  3. Release evidenceShift, lot, inspection record, approval and downstream traceability

What evidence should a Maruti VSA readiness review contain?

Start with the current buyer-issued checklist and customer-specific requirements for the site, commodity and project. Ask the buyer to confirm the scope if it is unclear. Assign an owner to each major topic. Sample a recent shipment, a changed part and an abnormal condition instead of preparing a file of blank forms. For each sample, capture the part number, revision, lot, date, record owner and how a reviewer can retrieve the record. Close the gap by running a second sample after the fix.

How do APQP, PFMEA, control plan and PPAP work together?

Advanced Product Quality Planning (APQP) connects launch milestones with design and manufacturing work. Process Failure Mode and Effects Analysis (PFMEA) identifies what might go wrong and where controls matter. The control plan tells production what to check, how often and what to do when a limit is breached. Production Part Approval Process (PPAP) provides agreed evidence for customer approval. Follow a single characteristic through the process flow, PFMEA, control plan and shop-floor instruction. A revision mismatch across those documents is a signal to inspect recent production and confirm customer notification requirements.

How should a supplier handle a change before shipment?

Log the change and identify the affected part numbers, lots, tooling, process sites and external providers. Decide which validations must be repeated and whether the customer needs notice or approval before release. Update the control plan, operator instructions and measurement setup together. Release the change after the authorised person signs off, then review the first production lots for evidence that the new controls work.

Worked example

A fixture moves but the inspection form stays the same

A bracket supplier moves a welding fixture to a second line. The inspection form has the same part number, but the plan on the second line still references the old gauge revision. The team identifies the affected lots, pauses release where appropriate, checks the gauge against the approved inspection method, and agrees next steps with the customer if required. For the new line, retain the approved revision, evidence from the first validated lots and sign-off from the process owner.

Test the control plan on a changeover

For a supplier process audit, pick a lot made just after a tool or product changeover. Compare the first-off approval, setup settings and measurement records against the current control plan. Follow the same lot through release and shipping to see whether the records tell a consistent story.

  1. Choose the sample

    Record the part and revision, line, shift, changeover time and first lot released. Ask the operator to explain the restart and what would trigger a hold.

  2. Trace the abnormality

    Use a training record to walk through an out-of-limit reading. Identify who would stop the process, how the last known acceptable check sets the review boundary and who can authorise release.

  3. Confirm the fix

    If a second sign-off was missing, verify the next comparable changeover on a different shift. Record the relevant lot, approver and time so a second reviewer can reproduce the check.

Evidence checklist

FocusWhat to checkEvidence or decision
Customer and drawing revisionCurrent buyer instructions with scope and revisionSales or quality confirms the latest revision
Special characteristicSame characteristic appears in PFMEA, control plan and instructionProduction demonstrates the reaction plan
Lot releaseApproved measurement method, traceability, release recordQuality traces a finished lot to inputs and checks

Common questions

Is IATF 16949 certification enough for a customer supplier audit?

A customer may still run its own audit. Confirm its current criteria, applicable customer-specific requirements, and which site and process are in scope.

How do you check if an 8D action worked?

Measure the result after the permanent action under comparable conditions. Include a recurrence check on similar parts, lines or failure modes where the cause could also exist.

Which production records tell you whether a changeover was controlled?

Start with a time-stamped setup check, first-off result and transfer to the production release record. A useful sample also shows the approved document revision and the person who released the lot.

Apply this guidance with Sakhi

Ask Sakhi to trace the link between the buyer’s requirements, your control plan and evidence from a recent lot.

Open enquiry form

Our Inspiration

Mata Ji
Quote Icon Guru Maa Ji Quote Icon

Information

Enquiry Now

    2026 © www.isoconsultants.in. All Right Reserved. | Website Design Company in India Maitrix Infotech

    × How can I help you?